Replacement Ignition Coil 96415010 UF852
IGNX No: STIC4118
OE No.:
96415010
SMP :
Inquiry Now >>
UF-852 (UF852)
Product Detail
| ST NO. | Brand | OEM No. | Model(s) & Years | PINS | MODULE |
| STIC4118 | CHEVROLET | 96415010 | CHEVROLET LACETTI 1.8L (2005-2009) CHEVROLET OPTRA 2.0L (2003-2008) |
3 PINS | WITHOUT |
| DAEWOO | 96415010 | DAEWOO NUBIRA 1.8L (2003-/) DAEWOO LACETTI 1.8L (2003-2004) DAEWOO TOSCA 1.8L (2006-/) |
3 PINS | WITHOUT |
This Chevrolet / Daewoo ignition coil is supplied for the listed OE number 96415010. It uses a 3 pins connector and without-module configuration, so connector layout, housing profile, mounting arrangement, and overall coil structure are useful points to review when confirming the required replacement product.
During product comparison, the OE number can be checked together with connector orientation, terminal position, plug direction, housing shape, mounting points, and overall dimensions of the original coil. Reviewing several physical details together provides a clearer reference than relying on the part number or exterior appearance alone.
Product Matching Details to Check
Listed OE Number
Confirm 96415010 against the original component during sample review, quotation, catalog preparation, or order confirmation. The OE reference can be checked together with the physical coil design.
3 Pins Connector
The 3 pins connector is an important visible matching point. Connector shape, terminal layout, locking position, plug direction, and installation orientation can be compared with the original ignition coil.
Without Module Structure
This ignition coil is listed as without module. Module status should be considered together with connector configuration, housing design, and mounting structure when confirming the required replacement specification.
Electrical and Insulation Inspection Focus
The condition of an ignition coil is related to its primary and secondary windings, internal insulation, terminals, and electrical connections. During product evaluation, these areas can be reviewed together with connector fit, housing condition, mounting dimensions, and general assembly condition.
Engine heat, repeated temperature changes, vibration, and electrical loading are common operating conditions around ignition components. Depending on the inspection requirements, checking may include terminal contact, connector condition, housing integrity, insulation-related characteristics, and relevant electrical measurements.
Sample and Batch Specification Review
During sample evaluation, the replacement coil can be compared with the original part for the listed OE number, 3 pins connector, without-module structure, connector orientation, housing profile, and mounting details. Original coil photos or connector close-ups can provide additional reference when further confirmation is required.
For repeat or batch purchasing, the approved sample can be retained as a reference for product structure, connector configuration, visible assembly details, labeling, and packaging requirements. Project-specific specifications can then be reviewed before subsequent order arrangements.
Related Products
