Product Detail
| ST NO. | Brand | OEM No. | Model(s) & Years | PINS | MODULE |
| STIC4108 | CHEVROLET | 24109876 F01R00A130 |
CHEVROLET CAVALIER 1.0T (2018-/) CHEVROLET TRAX 1.0T (2019-2021) |
3 PINS | WITH |
This Chevrolet ignition coil is supplied for the listed OE numbers 24109876 and F01R00A130. It features a 3 pins connector and with-module configuration, so connector layout, module structure, housing profile, and mounting arrangement are useful points to review when confirming the required replacement product.
During product comparison, buyers can review the applicable OE number together with connector orientation, terminal position, plug direction, coil body shape, mounting details, and overall dimensions of the original part. Checking several structural characteristics together provides a clearer basis for confirmation than relying only on the part number or exterior appearance.
Connector and Module Structure Check
Listed OE References
Confirm the applicable listed OE number against the original component during sample review, quotation, catalog preparation, or order confirmation. The OE reference can be checked together with the physical coil structure.
3 Pins Connector
The 3 pins connector is an important visible matching point. Connector shape, terminal arrangement, locking position, plug direction, and installation orientation can be compared with the original ignition coil.
With Module Configuration
This ignition coil is listed as with module. Module configuration should be reviewed together with connector design, housing shape, and mounting structure when confirming the required replacement specification.
Electrical and Insulation Inspection Focus
Ignition coil operation is related to the primary and secondary windings, internal insulation, terminals, electrical connections, and control-related components within the coil assembly. During product evaluation, these areas can be considered together with connector fit, housing condition, mounting dimensions, and overall assembly condition.
Engine heat, repeated temperature changes, vibration, and electrical loading are common working conditions around ignition components. Depending on the inspection requirements, checking may include terminal contact, connector condition, housing integrity, insulation-related characteristics, and relevant electrical measurements.
Sample and Incoming Inspection Reference
For sample approval, the supplied coil can be compared with the original part for the applicable OE number, 3 pins connector, with-module structure, connector orientation, housing profile, and mounting details. Original-part photos or connector close-ups can also be retained as visual references when further confirmation is needed.
For repeat or batch purchasing, the approved sample can serve as a reference during incoming inspection for connector configuration, visible assembly details, labeling, and packaging. Additional order-specific requirements can be confirmed according to the actual purchasing project.
Related Products
