Ignition Coil 2730102600/2730102800
IGNX No: STIC2039
OE No.:
Inquiry Now >>
2730102600
2730102800
2731002620
2731002630
Product Detail
| ST NO. | Brand | OEM No. | Model(s) & Years | PINS | MODULE |
| STIC2039 | HYUNDAI | 2730102600 2730102800 2731002620 2731002630 |
HYUNDAI ATOS 1.0L / 1.1L (1998-2005) HYUNDAI i10 1.1L (2007-/) |
2 PINS | WITHOUT |
This Hyundai ignition coil is supplied for the listed OE numbers 2730102600, 2730102800, 2731002620, and 2731002630. It uses a 2 pins connector and without-module configuration for replacement requirements using this type of ignition coil structure.
When reviewing the product, buyers can compare the listed OE number with the connector shape, terminal position, plug direction, housing profile, mounting arrangement, and overall dimensions of the original coil. Checking several physical details together can provide a clearer basis for product confirmation than relying on appearance alone.
Key Structure Details to Check
Listed OE Numbers
Check the applicable listed OE number against the original part during quotation, sample review, catalog preparation, or order confirmation. The OE reference can be reviewed together with the physical coil design.
2 Pins Connector
The 2 pins connector is an important matching feature. Connector form, terminal arrangement, locking position, plug direction, and installation orientation can be compared with the original ignition coil.
Without Module Configuration
This ignition coil is listed as without module. Module status can be reviewed together with the connector, housing shape, and mounting arrangement when confirming the required coil structure.
Electrical Construction and Operating Environment
Ignition coil operation is related to the primary and secondary windings, internal insulation, terminals, and electrical connections. During replacement-product evaluation, these areas can be considered together with connector fit, housing condition, and installation dimensions.
Engine heat, temperature changes, vibration, and repeated electrical loading are common conditions around the ignition system. Depending on the buyer's inspection requirements, evaluation may include connector and terminal condition, housing and assembly condition, insulation-related characteristics, and relevant electrical measurements.
Checks Before Installation
Before installation, the replacement coil can be compared with the removed part for the listed OE number, 2 pins connector, without-module structure, connector orientation, housing shape, and mounting details. The connector and surrounding installation area can also be checked for visible damage, contamination, or poor contact.
If the coil is being replaced during diagnosis of an ignition-related problem, spark plug condition, plug gap, wiring, and connector contact can also be reviewed. Installation and related inspection should follow the applicable vehicle service requirements.
Related Products
