Ignition Coil 4762312/04762312 UF115
IGNX No: STIC4301
OE No.:
4762312
04762312
SMP :
Inquiry Now >>
UF-115 (UF115)
Product Detail
| ST NO. | Brand | OEM No. | Model(s) & Years | PINS | MODULE |
| STIC4301 | JEEP | 4762312 04762312 |
JEEP CHEROKEE L6 4.4L (1991-1993) JEEP CHEROKEE BRIARWOOD L6 4.4L (1991-1992) JEEP CHEROKEE COUNTRY L6 4.4L (1993) JEEP CHEROKEELAREDO L6 4.4L (1991-1992) JEEP CHEROKEE LIMITED L6 4.4L (1991-1992) JEEP CHEROKEE POSTAL L6 4.4L (1993) JEEP CHEROKEE SPORT L6 4.4L (1991-1993) JEEP COMANCHE L6 4.4L (1991-1992) JEEP COMANCHE ELIMINATOR L6 4.4L (1991-1992) JEEP COMANCHE PIONEER L6 4.4L (1991-1992) JEEP GRAND CHEROKEE L6 4.4L (1993) JEEP GRAND CHEROKEE LAREDO L6 4.4L (1993) JEEP GRAND CHEROKEE LIMITED L6 4.4L (1993) JEEP WRANGLER L6 4.4L (1991-1993) JEEP WRANGLER ISLANDER L6 4.4L (1991-1992) JEEP WRANGLER RENEGADE L6 4.4L (1991-1993) JEEP WRANGLERS L6 4.4L (1992) JEEP WRANGLER SAHARA L6 4.4L (1991-1993) |
2 PINS | WITHOUT |
This Jeep ignition coil is supplied for the listed OE numbers 4762312 and 04762312. It uses a 2 pins connector and without-module configuration for replacement requirements using this type of ignition coil structure.
When reviewing the product, buyers can compare the listed OE number with the connector form, terminal position, plug direction, housing profile, mounting points, and overall dimensions of the original coil. Checking several details together can be useful when similar ignition coil designs are being compared.
Key Matching Details Before Ordering
Listed OE Numbers
Check 4762312 or 04762312 against the original part during quotation, sample review, catalog preparation, or order confirmation. OE information can be reviewed together with the physical coil structure.
2 Pins Connector
The 2 pins connector is one of the main visible matching points. Connector shape, terminal position, locking structure, plug direction, and installation angle can be compared with the original ignition coil.
Without Module Structure
This ignition coil is listed as without module. Module status can be checked together with the connector, housing shape, and mounting arrangement when comparing the replacement part with the original coil.
Electrical Construction and Inspection Focus
Ignition coil operation is related to the condition of the primary and secondary windings, electrical insulation, terminals, and internal connections. When evaluating a replacement coil, these areas can be considered together with connector fit, housing condition, and installation dimensions.
Temperature changes, engine vibration, and repeated electrical loading are common operating conditions around the ignition system. Depending on the buyer's inspection requirements, checking may include terminal condition, connector contact, housing condition, insulation-related characteristics, and relevant electrical measurements.
Replacement and Ignition System Check
If the ignition coil is being checked because of starting, idling, or misfire-related symptoms, related ignition-system components can also be reviewed. Spark plug condition, plug gap, wiring, connector contact, and power supply may all be relevant during diagnosis.
Before installation, the replacement coil can be compared with the removed part for connector position, mounting details, and visible condition. For quotation or sample checking, buyers can also provide the listed OE number, required quantity, and original coil photos when further confirmation is needed.
Related Products
